  EMAIL   sales@wear-resistant.net
You are here: Home » Products » Rubber Backed Alumina Ceramic Liner » Ceramic Epoxy Resin Glue

Product Category

loading

Share to:
sharethis sharing button

Ceramic Epoxy Resin Glue

1.      Antiskid surface, there are spherical or square bumps on the ceramic surface, and the friction coefficient is three times than traditional pulley lagging, which can greatly prevent the conveyor belt from slipping , and improve the transportation efficiency.

2.     No material accumulation, there are grooves between each ceramic block, and the material on the drum can be discharged along the groove.

3.     The convex points on the surface have no edges and corners, the roller and the conveyor belt will not slide relatively. Therefore, there will be no additional wear on the conveyor belt.

4.     Long service life. The service life is more than 5 times of ordinary rubber drum.

5.     Impact resistance. The elasticity of the underlying rubber has a good buffer effect.

Availability:
Quantity:

[Properties]

1.      Antiskid surface, there are spherical or square bumps on the ceramic surface, and the friction coefficient is three times than traditional pulley lagging, which can greatly prevent the conveyor belt from slipping , and improve the transportation efficiency.

2.     No material accumulation, there are grooves between each ceramic block, and the material on the drum can be discharged along the groove.

3.     The convex points on the surface have no edges and corners, the roller and the conveyor belt will not slide relatively. Therefore, there will be no additional wear on the conveyor belt.

4.     Long service life. The service life is more than 5 times of ordinary rubber drum.

5.     Impact resistance. The elasticity of the underlying rubber has a good buffer effect.

6.     Convenient installation. There is no need to unload the drum from the conveyor, which reduces the installation cost and time, and also reduces the wear of other parts when disassembling the drum.

[Application]

Ceramic pully lagging is suitable for the conditions which is easy to slip and has high wear rate, especially for steel cable conveyor belt, high speed and high tension conveyor belt.

Ceramic Pulley Lagging

Ceramic Pulley Lagging Manufacturers

Previous: 
Next: 
Contact Us
Add : Zibo Development Zone,China
Tell : +8615864491390
Web : www.wear-resistant.net
Email : sales@wear-resistant.net 
Copyright 2020@Titan Industrial Ceramic. All Rights Reserved.